.jpg)
| Mouse Over Main Image to Zoom In |
 |
|
|
 |
Description |
 |
 |
Specs |
 |
|
Accessories |
|
|
Manuals |
|
|
Easy Install |
|
|
FREE FREIGHT ON ALL FOUNTAINS *
When you watch the water dance through the pebbles and wash past the slate on the Medium Sycamore Springs fountain, you will be reminded of a calmer, simpler time. This wall mounted fountain is over two feet tall and three feet wide, making it large enough to be the focal point of any room, but small enough so it's not obtrusive. The coppervein finish on the frame makes it blend perfectly with any modern decor. A handy remote control allows you to change the brightness of the LED lighting on these indoor fountains to set just the right mood for your home or office.
The NSI pebbles and slate are assembled using patent pending technology which fuses the genuine Indian Rajah slate to a lightweight composite material that forms the pebbles, which are hand painted individually to create the appearance of real river rocks. The composite material reduces the weight by 90 percent, making it easy to hang on a wall.
Also available in this finish
*NSI™ Pebbles and Slate – Water fountains made with our NSI™ Pebbles and Slate use our patent pending technology which shears a layer of genuine Indian Raja Slate and fuses it to composite material which has been formed from genuine polished river rocks. Each one is individually hand painted and the result is a finished product that is indistinguishable from a panel of Slate and Polished River Rocks. All the beauty is retained and the weight is reduced by over 90% making it easier to hang a wall fountain.
*Please note that these units are handmade and measurements may vary slightly. Texture and color of the copper and pebble/slate may also vary slightly with each fountain.
* Free freight is only available in the Continental United States. Please contact us so that we can provide you with a quote when shipping to Alaska, Hawaii, other US territories or international.
* Free freight is not available for dealers. Please contact your sales rep for information.
|
|
Product Specifications
- Product Dimensions:24.5"H x 37.5" W x 5" D
- Copper Vein Finish
- *NSI™ Pebbles and Slate – Water fountains made with our NSI™ Pebbles and Slate use our patent pending technology which shears a layer of genuine Indian Raja Slate and fuses it to composite material which has been formed from genuine polished river rocks. Each one is individually hand painted and the result is a finished product that is indistinguishable from a panel of Slate and Polished River Rocks. All the beauty is retained and the weight is reduced by over 90% making it easier to hang a wall fountain.
- Capacity (gallons) 3
- Easy 30 minute or less installation
- Indoor Use Only
Included with fountain
- Polished river rocks
- LED Lighting with IR Remote (Low Voltage)
- Adjustable flow valve
- Submersible pump
Shipping Information
- Shipping Dimensions: 42"L x 28"W x 10" H
- Shipping Weight: 51 lbs.
Inasmuch as these are authentic replications of natural stone and slate formations, it should be understood that stones do not make the best vertical surface for water to flow without any incident of what we refer to as 'micro splashing'. This natural phenomenon is beyond our control. It is recommended that you adjust the water flow with the control valve to the lowest flow rate to get the effect of water flowing naturally over pebbles which will minimize this. While we have taken great care to arrange the master mold of natural pebbles to minimize this there is high probability that it might occur, (more prevalent on large model). Therefore we recommend that you DO NOT place this fountain above furniture, wooden floors, or any other area that would be subject to damages caused by small droplets of water. In addition if this should occur you must take care to maintain this area and, depending on the floor texture, beware of possible slip hazard.
*Please note that these units are handmade and measurements may vary slightly. Texture and color of the copper and pebble/slate may also vary slightly with each fountain.
* Free freight is not available for dealers. Please contact your sales rep for information.
|
The following items are suggested to either accessorize your fountain or help maintain it.
Protec 8 oz. Bottle
Protec's powerful dual-action formula makes it very easy to maintain the beauty of water statuary surfaces. Protec contains a unique blend of
advanced organo-phosphonates for superior protection against both white calcium mineral buildup and metallic stains. Protec will prevent and
remove existing mineral deposits and metal stains on all types of statuary surfaces. It will also help prevent pump damage due to hard water
buildup. Protec also significantly reduces distilled water use for indoor fountains. Protec treated water is very safe for birds, plants, animals
and fish.
Fountec 8 oz. Bottle
Fountec kills most types of algae and prevents regrowth in decorative fountains, water gardens (without fish), tabletops, and birdbaths. Fountec's
cationic polymers also super-clarify water.
A small weekly Fountec application added to fountain water becomes absorbed onto the algae and bacteria cell walls. The positive charged polymers
coat their surfaces disrupting metabolic functions resulting in suffocation.
Magnetic Water Treatment System (1 Pair)
The Magnetic Water Treatment system helps to reduce scale build-up on water fountain surfaces due to hard water. No chemicals, power, or
recharging required, simply install it.
Chlorfree Ionizer Capsule
The positively charged ions in Chlorfree capsules are able to control the growth of algae, bacteria and viruses; even those that chlorine can’t
eliminate. The perfect formula with the correct metal proportion (Silver, Copper, Zinc and Carbon) made water safe for human consumption, bathing
and/or swimming. This said, you don’t have to worry when your toddler sticks his hands in your Bluworld water feature or when your pet likes to
drink out of it.
|
|
|
|
.jpg)
.jpg)
